Loader

Category: Valves

Model WMA-1

admin Wet System Valves And Water Motor Alarm Leave a comment

Water Motor Alarm

Hydraulically Operated Mechanical Sprinkler Alarm

Features:

  • Hydraulically operated outdoor alarm for use with appropriate fire protection system valves (alarm, dry, deluge)
  • Supplied by dedicated outlet in valve trim line or retard chamber
  • Uses energy-efficient lightweight impeller design capable of producing very high sound level
  • Corrosion-resistant aluminum alloy gong, gong-mount, and water motor housing
  • Polymer bearings do not require lubrication
  • Must be mounted to a rigid wall surface
  • Can accommodate range of wall thicknesses from 2″ to 18″ (50 to 450 mm)
  • Furnished with approved 3/4” (20 mm) Y-strainer for use in alarm line
  • Maximum rated working pressure is 300 psi (20,7 bar)
  • Listings and Approvals: UL, ULC, FM, VdS, & LPCB

Model AV-1-300

admin Wet System Valves And Water Motor Alarm Leave a comment

Alarm Check Valve

300 psi (20,7 bar) 2-1/2″ to 8” (DN65 to DN200)

Vertical or Horizontal* Installation

Features:

  • Sizes 2-1/2″ thru 8” (DN65 thru DN200)
  • AV-1 Alarm Valves may be installed vertically or horizontally
  • Groove x Groove, Flange x Flange, Flange x Groove Alarm Valves are divided seat ring, rubber-faced clapper, check type, water flow alarm valves
  • For use in wet pipe (automatic sprinkler) fire protection systems
  • Automatically actuates electrically and/or hydraulically operated alarms when there is a steady flow equivalent to the discharge rate for one or more sprinklers
  • Optional Retard Chamber used in installations subject to variable pressure (generally associated with public water supplies) to help prevent false alarms
  • Available pre-assembled with modular trim to provide a quick and convenient method for trimming valve risers. Contact TFP for details
  • Working water pressure range is 20 to 300 psi (1,4 to 20,7 bar)
  • Listings and Approvals: UL, C-UL, & FM

Model FTR-1

admin Deluge System Valves and Accessories Leave a comment

Fixed-Temperature Release For Deluge and Preaction Systems

Wet or Dry Pilot Release Service

Features:

  • Fixed-temperature, heat detector intended for wet or dry pilot release service
  • Can be used for pilot line service, instead of standard sprinklers, to activate deluge and preaction systems equipped with either wet or dry pilot line detection
  • Corrosion resistant assembly option for outdoor applications (Teflon® coated)
  • Maximum 40 ft. x 40 ft. spacing

Series MJC

admin Deluge System Valves and Accessories Leave a comment

Multiple Jet Controls

DN20, DN25, DN40, and DN50, 12 bar BSPT Inlet & Outlets Threads

Features:

  • The TYCO Series MJC Multiple Jet Controls are control valves with self-contained heat actuating units.
  • They are designed for use as the system control valve for fire protection systems of limited size, where the MJCs are located within the protected area.
  • The MJCs are typically used as an auxiliary deluge valve to control the flow of water to specific areas within a larger wet pipe, dry pipe, or deluge system. As such they can be used with supply piping from either a wet pipe system or a dry pipe or deluge system. In all cases, waterflow alarms are provided by the main automatic control valve for the system that supplies the supply line to the Series MJC Multiple Jet Controls (e.g., alarm valves, dry pipe valves, or deluge valves).
  • Listings and Approvals: LPCB

Model DV-5

admin Deluge System Valves and Accessories Leave a comment

DV-5 Deluge Valve, Diaphragm Style, 1-1/2″ thru 8” (DN40 thru DN200),

Deluge System – Electric Actuation

Features:

  • Electric Actuation
  • Operation of an electrical device such as a heat sensitive thermostat, smoke detector, or electrical manual control station signals the deluge valve releasing panel to energize the Solenoid Valve. In turn, the energized Solenoid Valve opens to release water from the Diaphragm Chamber faster than it can be replenished through the 1/8 inch (3,2 mm) restriction provided by the Model ASV-1 Automatic Shut-Off Valve in the diaphragm supply connections.
  • This results in a rapid pressure drop in the Diaphragm Chamber and the force differential applied through the Diaphragm that holds it in the set position is reduced below the valve trip point. The water supply pressure then forces the Diaphragm open permitting water to flow into the system piping, as well as through the Alarm Port to actuate the system alarms.
  • Listings and Approvals: UL, C-UL, and FM

Model DV-5

admin Deluge System Valves and Accessories Leave a comment

DV-5 Deluge Valve, Diaphragm Style, 1-1/2″ thru 8” (DN40 thru DN200),

Deluge System – Wet Pilot Actuation

Features:

  • Wet Pilot Actuation
  • Opening of a wet pilot sprinkler, releases water from the Diaphragm Chamber faster than it can be replenished through the 1/8 inch (3,2 mm) restriction provided by the Model ASV-1 Automatic Shut-Off Valve in the diaphragm supply connections.
  • This results in a rapid pressure drop in the Diaphragm Chamber and the force differential applied through the Diaphragm that holds it in the set position is reduced below the valve trip point. The water supply pressure then forces the Diaphragm open permitting water to flow into the system piping, as well as through the Alarm Port to actuate the system alarms.
  • Listings and Approvals: UL, C-UL, and FM

Model DV-5

admin Deluge System Valves and Accessories Leave a comment

Deluge Valve Vertical or Horizontal, Diaphragm Style, 250 psi, 1-1/2″ thru 8″

Features:

  • The Model DV-5 Deluge Valves are diaphragm type valves designed for vertical or horizontal installation and for fire protection system service.
  • They are used as “automatic water control valves” in deluge, preaction, and special types of fire protection systems such as foam-water and double interlock systems.
  • The diaphragm style design of the DV-5 Valve allows external resetting – providing for easy resetting of a deluge or preaction system without having to open a valve handhole cover to manually reposition a clapper and/or latch mechanism.
  • Listings and Approvals: UL, C-UL, and FM

BFV-300 Butterfly Valve

admin General Purpose Valves Leave a comment

The BFV-300 Butterfly Valve is part of Tyco’s extensive range of fire protection solutions. As a single source for fire protection products, you can count on Tyco’s worldwide reputation for quality in design, engineering, testing and performance.

The BFV-300 combines unique new features into our best butterfly valve yet. Its more compact size means greater flexibility for connection locations. Its smarter, simpler design means more efficient installation, easier operation and long-term performance.

  • 300 psi rating
  • A full range of sizes from 2” to 12” (DN50 – DN300)
  • Suitable for new installations or upgrades in virtually any system

Traveling nut gearbox design reduces gearbox size and overall weight of the valve compared to traditional worm-operated and segmented gearboxes.

  • 50% smaller gearbox on average than conventional gearboxes
  • 40% lighter valve on average than traditional gearboxes on the market

Model RV-1

admin General Purpose Valves Leave a comment

Pressure Relief Valves 2″ through 8″

Features:

  • Globe or angle pattern
  • Installation in any orientation
  • One-piece, one-moving-part diaphragm
  • Ceramic enamel-coated interior
  • Standard nylon-coated exterior
  • Accurate pressure control
  • In-line service
  • No need to bleed trapped air from the diaphragm chamber
  • Rated for use at a Maximum Inlet Pressure of 250 psi (17,2 bar)
  • Listings and Approvals: UL & FM

Model PRV-1

admin General Purpose Valves Leave a comment

Pressure Reducing Valve Pilot Operated, Globe and Angle Body Styles

Features:

  • The PRV-1 is intended to automatically maintain the outlet “set pressure” (static and residual) within a close range, regardless of fluctuations in the higher pressure inlet line or varying flow rates.
  • Can be installed either vertically or horizontally
  • Available with threaded, flanged, and cut groove inlet and outlet connections
  • Grooved connections are suitable for use with grooved pipe couplings that are listed or approved for fire protection service
  • One piece, one moving part diaphragm
  • In-line service (for maintenance)
  • Pilot valve provides for any outlet “set pressure”, i.e., 80 to 225 psi (5,5 to 15,5 bar)
  • Rated for use at a maximum pressure of 250 psi (17,2 bar)
  • Factory outlet “set pressure” of 125 psi (8,6 bar)
  • Field outlet “set pressure” range of 80 to 225 psi (5,5 to 15,5 bar)
  • Listings and Approvals: UL, & FM
Back To Top