Loader

Author: admin

RAPID RESPONSE Series LFII Residential Sprinklers

admin Residential Sprinklers Leave a comment

Pendent Wet Pipe and Dry Pipe Systems, K-factor=4.9

Features:

  • Intended for use in the following scenarios:
  • Wet and dry pipe residential sprinkler systems for one/two-family dwellings and mobile homes per NFPA 13D
  • Wet and dry pipe residential occupancies up to and including four stories in height per NFPA 13R
  • Wet and dry pipe sprinkler systems for the residential portions of any occupancy per NFPA 13
  • Approved for special applications with beamed ceilings

Hazard: Wet or Dry

Temperature: 155, 175

Thread: 1/2″

Approval: UL, C-UL, NSF

Response: FR

SIN Numbers: TY2234

Wrench: W6

Wrench [Recessed]: W7

Series DS-1 Dry-Type Sprinklers

admin Dry Sprinklers Leave a comment

Pendent, Upright, and Horizontal Sidewall

Standard Response, Standard Coverage, K-factor=5.6K

Features:

  • Standard coverage
  • All hazards (light hazards, horizontal sidewall)
  • Lengths up to 48″ (1220 mm)
  • Designed for use in applications where sprinklers and/or connecting piping may be exposed to freezing conditions, or the sprinkler system is seasonally drained
  • Special assembly provides a seal at the main pipe to prevent water from entering the assembly until the sprinkler operates
  • Designed for use in applications requiring dry sprinklers, or where building construction or aesthetic considerations make the installation of dry horizontal sidewall sprinklers more desirable than the dry pendent type

Hazard: All,Light Hazard/Ordinary Hazard

Temperature: 135, 155, 175, 200,

286, 360

Thread: 1″

Approval: UL, C-UL, FM, NYC, LPCB,

CE, VdS

Response: Standard Response

SIN Numbers: TY3155,TY3255,TY3355

Wrench: Pipe Wrench

Wrench [Recessed]: ,W7

Series DS-1 Dry-Type Sprinklers

admin Dry Sprinklers Leave a comment

Pendent, Upright, and Horizontal Sidewall

Quick Response, Standard Coverage, K-factor=5.6K

Features:

  • Light hazard/Ordinary hazard
  • Lengths to 48″ (1220 mm)
  • Designed for use in applications where sprinklers and/or connecting piping may be exposed to freezing  conditions, or the sprinkler system is seasonally drained
  • Special assembly provides a seal at the main pipe to prevent water from entering the assembly until the sprinkler operates
  • Designed for use in applications requiring dry sprinklers, or where building construction or aesthetic considerations make the installation of dry horizontal sidewall sprinklers more desirable than the dry pendent type

Hazard: All,Light Hazard/Ordinary Hazard

Temperature: 135, 155, 175, 200, 286

Thread: 3/4″,1″

Approval: UL, C-UL, FM, NYC

Response: Quick Response

SIN Numbers: TY3935,TY3735,TY3135,TY3235,TY3335

Wrench: Pipe Wrench

Wrench [Recessed]: W7,

Model ESFR-17

admin Dry Sprinklers Leave a comment

Dry Type Pendent Sprinklers

Early Suppression Fast Response 16.8 K-factor

Features:

  • Early Suppression, Fast Response (ESFR)
  • The Model ESFR-17 Dry Type Sprinklers are primarily used for ceiling only sprinkler protection and used to protect solid piled, palletized, and rack storage that is subject to freezing temperatures
  • Suppression mode sprinklers that are especially advantageous as a means of eliminating in-rack sprinklers when protecting high-piled box-in-box refrigerated storage areas
  • The drop between the inlet and sprinkler remains dry until the sprinkler operates, allowing for a pendent sprinkler installation on a wet pipe sprinkler system where the dry drop and sprinkler are located in an area subjected to freezing temperatures
  • Eliminates in-rack sprinklers for box-in-box applications
  • The Model ESFR-17 Dry Type Pendent Sprinkler is FM Approved and has successfully undergone full-scale fire testing at FM Global, when used in conformance with applicable FM Global Property Loss Prevention Data Sheets.
  • Less costly to install and maintain than pre-action or antifreeze systems


Hazard: Storage

Temperature: 165, 212

Thread: 1-1/4″

Approval: UL, FM

Response: FR

SIN Numbers: TY7229

Wrench: W26

Series TY-B & TY-FRB

admin Special Sprinklers Leave a comment

Sprinklers Alternate Materials of Construction

Stainless Steel, SMO, and Titanium

Features:

  • TY-B: 5 mm diameter heat sensitive glass bulb, standard response
  • TY-FRB: 3 mm diameter heat sensitive glass bulb, quick response
  • Corrosion resistant, standard coverage spray sprinklers designed for use in commercial occupancies where corrosive atmospheres may exist
  • Alternate materials of construction (Stainless Steel, SMO, or Titanium) are utilized to extend the life of a sprinkler beyond that which might be expected of copper alloy sprinklers exposed to corrosive atmospheres
  • (SMO = stainless-molybdenum alloyed)

Hazard: All

Temperature: 135, 155, 175, 200,

286, 360

Thread: 1/2″,3/4″

Approval: UL, C-UL, LPCB,

Lloyds,LPCB

Response: Standard Response,Quick

RAVEN Institutional

admin Special Sprinklers Leave a comment

5.6K Institutional Sprinklers Pendent and Horizontal Sidewall

Quick Response, Standard and Extended Coverage

Features:

  • Quick Response
  • Standard and Extended Coverage
  • Designed for use in areas such as correctional, detention, and mental health care facilities as well as other commercial buildings
  • Both the pendent and horizontal sidewall styles are available for standard or extended coverage applications
  • Tamper-resistant features
  • 175 psi (12,1 bar)

Hazard: All

Temperature: 165

Thread: 1/2″

Approval: UL, C-UL

Response: Quick Response

SIN Numbers: TY3281,TY3381,TY3282,TY3382

Wrench: W25

Model WS Window Sprinklers

admin Special Sprinklers Leave a comment
  • Only UL tested sprinklers that can protect glazing in a wall or window and allow it to maintain its mechanical equivalent rating up to two hours
  • First sprinklers to be UL/C-UL Listed, ICC-ES, and ULC Listed & Approved for maintaining a rated assembly
  • Pendent allows installation farther away from the glass than the sidewall
  • Sidewall permits the window mullion to act as a baffle, allowing the sprinklers to be spaced closely together, if necessary
  • Provides the only UL tested option when seeking wall fire ratings when using heat strengthened, tempered, or ceramic glass
  • More Information: Browse Product Brochure

Hazard: Specific App.

Temperature: 155, 200

Thread: 1/2″

Approval: UL, C-UL, ULC, NYC, ICC

Response: FR

SIN Numbers: TY3388,TY3488

Wrench: W20

Type HV High

admin Nozzle And Nozzle Accessories Leave a comment
  • Open, directional spray nozzles
  • Designed for use in fixed water spray fire protection systems where a high velocity water application is needed, such as the protection of flammable liquids, electrical transformers, circuit breakers, oil-fired boilers and lube oil systems
  • Available in six different orifice sizes and six angle spray patterns
  • Produces a solid conical spray pattern

Type MV

admin Nozzle And Nozzle Accessories Leave a comment
  • The TYCO Type MV Nozzles are open (non-automatic) directional spray nozzles designed for use in water spray fixed systems for fire protection applications.
  • The MV Nozzles are effective in covering exposed vertical, horizontal, curved, and irregular shaped surfaces in a cooling spray to prevent excessive absorption of heat from an external fire and possible structural damage or spread of fire to the protected equipment.
  • In some applications, depending on water design density requirements, the Type MV Nozzles may also be used for fire control or extinguishment.
  • They are external deflector-type nozzles that discharge a uniformly filled cone of medium velocity water droplets.
Back To Top